...blank pages. Any suggestions? when replacing the toner did you remove the plastic film sealing the toner? if the drums receives no toner you will get blank pages. please check hope this helps good ...
...blank stripes are still there, you must remove the drum and t6oner combination and clean the laser glass located on the bottom of the machine. If the blank stripes do not appear, then the fault is on ...
Question about MFC 4420C All-In-One InkJet Printer
...blank sheets. To start ensure that is not a software problem. Go to Control Panel >> Installed Printers. Remove the printer. Install the printer again using the software disk or downloading the ...
...blank pages with a brother laser printer, you should check the laser and make sure the glass is not dirty or obstructed. You can find the laser glass when you remove the toner on the "ceiling" of the ...
...Downlevel Document." The status was blank, pages is N/A and size 79bytes. Unplug the printer cable... then unplug the printer from power. While the printer is off remove that job from the
...blank sheet after the specified number of pages. if you use File print then you will get what you want. So lets surpose you are printing 5 sheets and you get two printed and 3 blanks. Use another ...
...test print, new ink, cleaned multi-times, still blank! Silly question from my side: have you removed the tape covering the nozzles of the cartridges? Is it original Brother cartridges, or is
Question about MFC 490cw Color Inkjet Multi-Function Printer
new embroidery memory card into my machine. the LCD screen went blank. I turned off the machine and removed the card. I turned the machine back on and the screen is still blank. I can do anything now.
Two thin blank lines on the printed page. HI. I have a Brother MFC7820n. When I copy or receive a fax, I get two perfect vertical blank lines spaced evenly on the page. It is as if there are two small
Question about MFC-7820N Printer
...blank tapes. Worked fine a couple of months ago with same tapes. Print head cleaned to no avail. 1) First, make sure to update the printer drivers to the latest version. Refer to the printer's manual ...
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions