Questions & Answers for: Timex Ironman remove battery cover

...remove battery". Within the center of each clip, there's a small opening just large enough for a straight pin to be inserted. A jewelers screwdrive won't work - use a straight pin. Insert a straight ...

...remove and replace the battery). Now, the kicker, there will also be a small, brass spring-loaded connector to one side of the battery. It is nothing more than a tiny wound spring with an arm that ...

...battery in my Timex Iron Man Triathlon? I removed the 4 screws in the back but cannot remove the cover because of the overlap of the wrist band. You will need to remove the wrist first before the ...

...Remove the battery from its housing and replace it with your new battery (available at any electronics store or online). Reassemble the watch in the same way you to took it apart. OR take to a ...

...of your screwdriver.Remove the battery from its housing and replace it with your new battery (available at any electronics store or online). Reassemble the watch in the same way you to took it

...Remove and reinsert battery.If no result,proceed as follows: Use a watch tweezer with sharp endings.Remove watch back cover.You will see somewhere on the watch chassis "AC" engraved.There is a hole ...

...battery installed, but wrapped with a plastic strip or cover over the terminals to prevent it discharging while in the store. Either way, you will have to remove the back cover to check. You can do ...

...remove the movement from the watch to get at these little tabs; I don't remember ever having to do that with a Timex. Once the shield is loose or removed, the battery should slide right out. ...