Questions & Answers for: Plymouth Breeze remove battery cover

Question about 1999 Breeze

3 Answers

...battery, turn your wheel all the way and remove the cover, it can be found there. its behind the drivers side wheel well. look by your front left tire in front of it and you should see some butterfly ...

Ad

how do you remove the car battery to replace it. it is inside the drivers fender in front of the wheel, remove plastic cover and the rest is easy

Ad

Question about 1998 Breeze

1 Answer

where is the battery located behind the plastic fender cover just ahead of the passenger front tire.u will have to remove a few screws holding the cover to the front bumper.

battery on it. You can remove that part of the fender liner via some thumb twist screws and get to the battery. Its easier if you remove the left front tire. In front of the wheel well, you will see a

Question about 1998 Breeze

2 Answers

...a quarter turn to the left. This will release the inside front part of the wheel well cover and expose the battery. From there you should have no problem removing the battery or accessing the

...battery negative cable from remote negative terminal on shock tower and properly isolate to prevent accidental reconnection. Remove or disconnect the following: Steering column upper and lower covers ...

Question about 1999 Breeze

1 Answer

...remove the battery mount/hold down. It would be best to remove the top bolt first. Then use a 5/16 inch socket to remove the front mount battery cables, and the battery will slide right out. You may ...

Question about 1999 Breeze

1 Answer

...the battery cables from the battery and remove the cover,next remove the battery hold down bracket(i think or remove the bracket then cover) and remove the battery.re-install in reverse

Question about 1999 Breeze

1 Answer

...remove the battery battery clamps. The battery will now just slide right out for you. Don't ask me why such a random set up to change a battery. Makes no sense to me either. Hope this helps and ...

...remove the battery mount/hold down. It would be best to remove the top bolt first. Then use a 5/16 inch socket to remove the front mount battery cables, and the battery will slide right out. You may ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...