Questions & Answers for: Canon remove battery cover

Question about PowerShot A540 Digital Camera

2 Answers

...Remove battery 2.) Remove front plate (screw driver may be needed) 3.) Check all gears, make sure they are correctly fitted in place) 4.) Move the gear manually to make the lens come out. 5.) keep it ...

Ad

Question about PowerShot S70 Digital Camera

1 Answer

...Remove battery 2.) Remove front plate (screw driver may be needed) 3.) Check all gears, make sure they are correctly fitted in place) 4.) Move the gear manually to make the lens come out. 5.) keep it ...

Ad

Question about PowerShot S2 IS Digital Camera

1 Answer

battery cover trick worked for several months, but now the camera will not change aperature regardless of what I do. I tried the cover trick with no success. I wanted to get at the iris by opening the

Question about PowerShot A530 Digital Camera

1 Answer

...battery compartment lid open. It needs some strength to remove the rear cover. I suggest that you insert a screwdriver in the crack between both covers at the bottom or side of the camera and while ...

Question about PowerShot SD750 / IXUS 75 Digital Camera

1 Answer

remove the battery door from my ixus 75? I need to replace it as it slides open and powers off the camera - the tiny catch near the hinge point has snapped off somehow. I can get a new door from Canon

Question about PowerShot A40 Digital Camera

1 Answer

I have the new cover, just don't have instructions for removing and replacing. tia, Anne There is no instructions.Remove the cover nut's and keep those carefully.u can remove battery cover after that

Question about PowerShot A590 IS Digital Camera

1 Answer

...Remove the battery holder in the direction indicated by the arrow. 5. Remove the battery by pulling it up in the direction indicated by the arrow. 6. Insert a new battery with the (-) side facing up. ...

Question about (18x50) IS Binocular

1 Answer

...battery cover changing the battery cover I just broke the hinge pin while removing the old cover but found two wall Phillips had screws, under the rubber and was able to loosen the hinge enough to ...

Question about (18x50) IS Binocular

1 Answer

...remove the battery, Look if all contacts are clean and shiny. On the battery and in the camera. Check if the battery is really charged, by placing it again on the charger. After reinserting the ...

instructions to replace battery cover for canon powershot a2000 is 1) Purchase replacement battery cover. 2) Remove original battery cover 3) Attach new battery cover.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Canon Camera Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...