Questions & Answers for: remove back window sebring

Remove and replace convertable top on a Chryster Sebring We want to replace the convertible top on our Sebring. We have a replacement top that has the frame and everything. The hydraulic lines have ...

Ad

remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.

Ad

remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.

remove the door panel, pull the window back up and wedge cardboard between the glass and door, remove the two bolts holding the glass to the regulator, remove the couple of bolts holding the regulator

...back window on a 2005 sebring convertible will not work. I used it yesterday, but this morning I pushed the button and nothin happened. All the other windows worked. You either have a defective motor ...

Question about 2004 Sebring

1 Answer

...back up. Anyone have an idea as to whats causing this? (All the other windows work) Usual cause is dirty contacts in the switch. Try removing the switch and spraying "contact cleaner" in to it. If it ...

Question about 2004 Sebring

1 Answer

...back window but it just fallsback down as if it is no longer attached to anything. No good news here You know the issues and the routine Remove the door panels and side interior panel and replace the ...

...back side window? What do I have to remove and how do I do it? Try operating the window with both the driver's window switch, and the rear door window switch.When operating window with rear door ...

window motor. If you have a test light or a volt meters and understand how to use it than I would nce more than happy to walk you through the process. You out will also need to have access to the back

...back to life. then pulling open drivers door rubber harness cover where it enters car. look for wires in the loom that are cracked and broken. this is likely.as wires bend each time door is opened. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...