remove from the tank with gauge variable resistor unit. Due to the trouble of removing the tank I would recommend replacing the fuel pump inside the tank at the same time just because...just because..
remove? You shouldn't have to. Once you have the hub off the truck they will come out with a sharp rap with a good sized hammer. When you put the new ones in, try to line the grooves up as best as you
remove the seat cushion and replace it or the seat back cushion the heaters are intergrated into the foam the seat cushion unbolts with two fifteen millimeter nuts just under the front of the seat and
...crimping the end of the stud and then pull to check movement sometimes the bolts on the inside of the seat come loose for the back rest and need tightened. Remove the rear headrests from seat ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions