Questions & Answers for: Hotpoint removal

I need to change the door seal on a Hotpoint Aquarius WMA50 Can this be done by a novice - if so how? Any special tools required? Advice appreciated. Kev. Basic diy tools should be ok. Take out lid ...

Ad

Question about WMA64 Front Load Washer

1 Answer

need to remove case of hotpoint wma 63 i have to remove casing to replace spider and bearing but theere is no removeable rear panel so obviously the whole case needs removing i cant see screws clips ...

Ad

Question about Ultima WF860 Front Load Washer

2 Answers

how to change door seal on hotpoint m w a 60 washing m/c you need to remove the outer retaining ring which is a wire around the lip of the seal typically joined with a spring., using a small ...

Question about Ultima WF865 Front Load Washer

1 Answer

how do remove front seal on my ultima wf865 Remove top cover, unclip the control board, and unplug the lead to the board, remove screws holding board and remove same. Remove front panel screws, remove

Question about Aquarius WMA42 Front Load Washer

2 Answers

How to I remove the drum from a Hotpoint WM64 washing machine? I need to change the bearings. Remove top cover and rear panel. Remove belt and drum drive pulley.Remove clamp that secures door seal ...

Question about WMA54 Front Load Washer

3 Answers

can bearings be removed without removing the drum itself on a wma54 sorry no its a big job but here goes isolate from electric and power remove lid and rear bottom cover. remove soap drawer and remove

Question about Ariston Aquarius WD420 Front Load All-in-One Washer/Dryer

2 Answers

how do I remove and then replace a new door seal on my hotpoint WD420 washer / dryer First switch off electrics , Remove door interlock , leave wires on .remove soap dispenser,remove front panel with ...

Question about Aquarius WMA42 Front Load Washer

1 Answer

my machine wont spin it washes and empties but no spin? seems like the carbon brushes on the motor. To do this unplug machine, and then remove the panel at the bottom of machine on the rear, this is ...

Question about Aquarius WMA42 Front Load Washer

1 Answer

can't remove agitator on hotpoint washer I have a tangled drawstring under the agitator of my Hotpoint HTWP1000M2WW washer. I want to remove the agitator, but when I remove the fabric softener cap

how to remove the control unit on a hotpoint wm62 washing machine please The main control unit on the WM62 is at the top behind the user facia control panel. If you remove the lid you should get ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machine Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...