Questions & Answers for: Chevrolet Silverado 1500 relay switch

Question about 2000 Silverado 1500

2 Answers

located, the clicking sound should be a relay switch. (replace relay), if window still does not work you will need to check power at motor, ground connection, or obstruction within window track itself

Ad

Question about 2004 Silverado 1500 Crew Cab

1 Answer

relay or the ignition switch,check for power to the relay in the crank position,[pin 85 or 86] in the plug the relay was taken out of to see if the power to the relay goes away as soon as it is in the

Ad

...switch then the relay could be stuck, when you find it turn the lighting switch on and off to try to hear the relay clicking, if no clicking the relay is probably stuck, give it a couple of taps ...

...relay dump valve relays if you are experiencing abs problems get a professionals opinion if it is a lighting issure check the switch under the dash that contacts the pedal check all the fuses and ...

Question about 1999 Silverado 1500

2 Answers

...switch and still no head lights i do tho have running lights and turn signals check/ replace the light control module Maybe headlamp relay . Do you know what a relay is ? How to test a automotive ...

Question about 2001 Silverado 1500

1 Answer

...and i replace the headlight switch and multifunction switch. any ideas? SOUND LIKE FAULTY DIMMER SWITCH OR BAD DRL RELAY OR HEADLIGHT RELAY.IF ALL IS GOOD.YOU HAVE BAD GROUND TO HEADLIGHTS

Question about 2002 Silverado 1500

1 Answer

...engine running A/C switch on the relay should close if and clutch should come on. If it doesnt collapse the switch it self if the clutch compressor comes on you problem reside in the control ...

Question about 1999 Silverado 1500

1 Answer

...switch, relay or fuse.Could also be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit. Check that all switches return to ...

Question about 1999 Silverado 1500

1 Answer

...switch. The BCM will supply a ground to the courtesy lamp relay when closing any one of the above switches to ground. Ground for the reading lamp, cargo lamp, IP compartment lamp and the underhood ...

relay pulling the switch side over, providing a direct path to ground for the left cooling fan, which has voltage applied through the energized fan low relay. In high speed mode, the fans are operated

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...