Questions & Answers for: Cadillac DTS relay switch

loose/disconnected when the stereo was installed. If that's not it - check your fuse box or any relay switches connected to the power windows

relay could be drawing excess amps. Bad starter can do this as well. Also check ignition switch and wires to switch as they can be open from column adjustments My fuse keep blowing on my 2000 cadillac

2007 cadillac DTS Luxery III, heated and airconditioned seats inoperative all 4 heated seats are inoperative. lights in all switches light. Air conditioned seats are inoperative as well. Check ...

why is my dts clicking before starting when I try to start my car I get clicking sound I jump it off it starts faulty ign switch or starter relay

...relay in the fuse block under the rear seat - also check that. If those are OK, the valet switch in the glove box may have failed in the open position. Remove the glove box and disconnect the wire ...

...switch and also the ALDL circuit; and one under the back seat (BODY fuse) for the trunk release. Unfortunately, relay control signals for these releases run through the IPM (Instrument Panel ...

...part in the system such as the shift lock control switch at the brake pedal, the Park relay, the shift lock relay (if equipped) or the A/T shift lock control solenoid. Take it to a dealer

...switch side of the starter relay to the starter solenoid. If you knew how , in the under hood fuse / relay box is the starter relay , it has a four pin socket when relay is removed ! Two should have ...

switch , BCM , wiper relay , an wiper hi relay ! With a scan tool you would be able to access data parameters in the BCM - body control module . When you turn the switch to turn on the wipers , that's