Questions & Answers for: Craftsman regulator

pressure regulator gauge wont work on my 3 gal. air compressor how do i fix it or where do i get a new one (craftsman) i also lost my book , how often do i change the oil ? If the regulator is inline ...

3gal. aircompressor - craftsman model #921153101 replaced regulator and now i get bleeding thru the regulator when the tank is full and no airline is attached....when i hook a airline up the air stops

compressor won't build psi above 30,is this typical of the regulator or pump? the compressor is a 3 gal craftman about 1 yr old. sounds like the regulator is faulty, normal running air should reach ...

...is getting increasingly more difficult to obtain replacement parts for older compressors. If your regulator failed at a fairly high pressure adjustment, say around 100-120 lbs, you could just leave ...

Builds up 160 psi but no pressure on secondary side. Can't get any air out of regulator side know matter where I set the regulator You probably need a new regulator. When you crank down on the ...

Cannot adjust the air pressure with the regulator. I have tried removing all air pressure from the tank, then adjusting the regulator to its lowest pressure setting (turned counterclockwise as far as ...

I have an oilless 175psi craftsman, 1 hp. My regulator broke, and I replaced it with one from Homedepot for a husky, I believe. What happens is the pressure builds all the way sometimes, but mostly j ...

Regulator Problem. Both Gauges stay at same pressure when trying to adjust the outlet pressure for tool settings When turning on the compressor, both gauges go to the max of 150lbs before shutting off

...Both Gauges max out at the same pressure which is 150 Lbs. When turning the adjustment knob on Regulator to adjust correct outlet pressure for the air tools, both Gauges drop at same rate and to ...

Model 1000 riding lawn mower. Where is the voltage regulator? how do you explain this then? no regulator, has electric start It is attached at the battery. follow link to test. ...