...rear RH axle 2001 prerunner 2wd. I brushed a curb with my right rear wheel making a right turn and bent the axle. How do I change the axle? I'm very mechanicly inclined and wanted to know if anyone ...
Question about Meridian Adult 26-Inch 3-Wheel Bike
axle is bent or the wheel is not true. Prop up the rear of the bike on a stand and remove the problematic wheel. Manually pedal the bike and check the axle as it spins. If the axle is wobbling then it
rear tire is completely off, the inside (towards vehicle) is bald. Going from what I've heard I'm taking its a bent axle, and have been thinking about how to fix it. If it is the axle, what exactly do
broken axle i bent a axle on my car how do you know this ? this is a front wheel drive, correct ? where is axle supposely bent , rear ? you must clarify your problem in detail !!!!!!!!
...rear axle on a 98 Chevy K1500 truck Daughter had a wreak in which the rear tire hit a curb. Bent the rim. I think the hub, bearings and axle could have been bent. Removed differential cover. Spun ...
...going faster then the rear wheels lock up again Sounds like a bent axle.... or something in the rear differential. ...the heat generated by the bent axle will cause all the clearances to
...rear end is bad,I had a good mecanic check it out, my question is the used one was cheep,but one axle is bent,the question is can the gear box be removed from the used one and put in my car if your ...
Question about 2000 Mustang
rear tire on my 2004 chevy trailblazer wobbles Check for a bent wheel by fitting another wheel if it is ok the rim will be bent if its the same check for bent axle. a) bent rim b)loose lug nuts c) bad
Question about 2000 Mustang
...rear axle wobbling and propeller shaft hitting the fuel tank bracket possible causes. Sorry to say it sounds like you have a bent axle, If you mean Drive shaft when you say propeller shaft, then ...
Question about 2000 Mustang
...axle went back in but wont stay. I also need to replace the rear drum brake on the same atv. How do I do that? an accident with tree caused it --a few reasons c/v wont stay in --bent frame --bent ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions