Why does the camera Ready light blink red? The battery is low or exhausted. Recharge the battery or install a new one.
Why are my stored pictures corrupted? The memory card was removed or the battery expired while the Ready light was blinking. Retake the picture. Do not remove the card while the Ready light is ...
...camera have a slow response time when I press the shutter button? Before a digital camera is ready to take a picture, the electronics inside the camera must get ready to capture the picture
"The device is not ready" When I am transferring pictures from my Kodak EasyShare digital camera to my computer, a "The device is not ready" error message displays, and no pictures are transferred. ...
...the sequence of events: - power up works fine - lens comes out ok - green light glows steady, ready for a picture - picture takes fine - green light doesn't turn on again - no amount of
...slow, no cartridges installed -check black ink and check color cartridges blinking w/ on and off ready to calibrate (in ready to calibrate if doing nothing, just press cancel and -press photo and ...
...With most of these compact cameras, to conserve power, the camera does not always keep the flash ready to fire at any given second. Firing the flash uses a lot of juice, so if it was always at the ...
Question about EASYSHARE M1063 Digital Camera
...can charged you camera using 5V AC Adaptor or a USB cable taht attached into the computer Camera ready light status Ready light does not turn on and the camera does not work. -Install new
...the power adapter to the printer. Turn the printer on if necessary.Wait until the printer is ready to use. If the error condition continues: Open the printer access door.Remove and install the ...
...turn the Mode dial from Off to Auto . The Power ring glows green. The camera screen turns on. The Ready light blinks green while the camera performs a self-check, then turns off when the camera is ...
Usually answered in minutes!
601 Questions
559 Questions
492 Questions
428 Questions
435 Questions