Questions & Answers for: GMC Yukon ready

Ad

Question about 2001 Yukon

1 Answer

...and I have bought a duralast gold replacement from autozone. I have everything taken apart and ready reassemble but I cannot get the mech fan off the old pump to transfer to the new pump. ANy ...

Ad

Question about 1996 Yukon

2 Answers

02 sensors not ready : I replaced all 4 O2 sensors on my 1996 GMC 5.7L Yukon. My scan tool shows "Sensors not ready to communicate or available" for #2 & #4 ( downstream. #1 & #3 are fine and ...

Ad

Question about 2005 Yukon

1 Answer

. What it basically means is that driving conditions are not optimal so if you see that message, be ready for some sort of weirdness while steering

...change out the first time but... The tansmission will change out the first time but when it get ready to change out the second time it will not like it slips out of gear then when i get off the ...

Question about 1997 Yukon

1 Answer

...the seal and bearing You will need to pull the rear end cover off,make sure you have a drain pan ready. when you rotaye a rear tire the ring gear will turn,look for a bolt head on the spider gear ...

...good luck if both dash and radio- check dimmer switch on lighting control- could be getting ready to ...

Question about 1996 Yukon

2 Answers

Sensors not ready 2001 Chevy S10. I have driven more than 500 miles and sensors still read not ready. 02 Sens Not Ready, 02 Sens Htr Not Ready, Catalyst Not Ready. This is the heater side of the ...

Question about 2005 Yukon

1 Answer

...are many parts for this system under the hood all the way back to a can near your fuel tank, so get ready to learn about what does what in the EVAP system. If it's something else (no codes) let me ...

Question about 2003 Yukon

1 Answer

catalyst not ready on 2003 yukon keep driving it. it takes time once the codes are cleared for all the system checks to take place. This was done by the auto manufacturers to help eliminate the check ...

2003 GMC yukon 5.3 engine flex fuel no ck engine light on, yet when they go to inspect it it shows 3 inc codes. what can cause this? 3 inc codes ??? 3 incompleat code's.? Not code's - Readiness ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

573 Questions

2004 GMC Yukon
2004 GMC Yukon

501 Questions

2001 GMC Yukon
2001 GMC Yukon

300 Questions

2007 GMC Yukon
2007 GMC Yukon

319 Questions

1996 GMC Yukon
1996 GMC Yukon

233 Questions

Manuals & User Guides

Loading...