Questions & Answers for: ranger brakes

Ranger w/ABS Rear brakes lockup Rear brakes lockup especially on wet pavemant sounds like you need to replace the wheel cylinders also check brake shoes and adjust properly upon reassembly i have a 94

2001 ford ranger no brake lights I have a 2001 ford ranger and no brake lights, I have replaced the brake switch on the pedal but still nothing can anyone help me check fuses under the dash and in the

My 2002 Ford Ranger Edge brake lights do not work My 2002 Ford Ranger Edge 6cyl 3.0l engine brake lights do not work. Bulbs and fuses are okay. Any suggestions Brake light switch It is on the brake ...

...Ranger. It's for the front brakes. Does anyone have a manual? rotors,pads,calipers,brake hoses,brake lines,front brake hardware,wheel bearings and the races,grease seals i hope this helps you. ...

...ranger, I went to apply the brake and it went down to the floor. under the truck you will find the adjuster, to take the slack out of the cable, If that does not work adjust your rear brakes. Usually ...

ranger rear brakes on my 1992 ford ranger xlt are seized. A drum brake shoe lining may have become separated from the metal pad that holds it in place and will cause the wheel to lock. The only repair

...out on my 94 ford ranger. What could be the problem? I would check the brake light switch that is located on the top of the brake pedal. While the brakes would work, the brake lights

...brakes, and the calipers in the front of this 1998 Ford ranger 2 wheel drive and have bleed them and there is still not brakes.... please help..... I am at my wits end on this problem.... If the ...

What would i do if my 1992 ford ranger 2.3l only has one rear brake light not working? one rear brake light not working but reverse light works Your bulb is bad,remove and take to Autozone,it's cheap ...

I have a 2001 Ford Ranger that I'm replacing all the brake lines. I to know where the line from each wheel goes on the control module. ...