Questions & Answers for: ranger 4x4 ball joint replacement

1998 Ford Ranger 4x4 How do you replace the ball joints rent a ball joint tool from your local auto store, they can be rough to install.

...ranger 4x4. Needs front lower and upper ball joints. To order them they ask for the spindle spline count. No tag is on the front drive. Vin number will not give the count. Where can you get it with ...

...the front tires on a 2000 4x4 ranger lean in at the top.I have noticed it on most rangers. already replaced ball joints. It needs a front end alignment,they will correct this problem on the

...ranger 4x4 and i have replaced all the ball joints and it still makes a poping noise when i stop and take off again like a bushiung is bad what bushiung could it be control arm bushings that are worn ...

ranger, xlt, 4x4 v6 4.0 liter You will need to replace the control arm with the ball joint since it is not sold separately. If one is found it will be a foreign made piece of junk and not worth using.

...Ranger 4x4 Front right ball joint replacement question: Does the spindle need to be removed to remove the drive shaft? Any tips on spindle removal? All bearings, spacers etc are off and spindle nuts ...

how do you replace ball joints on 1994 ford ranger 4x4? Want a diagram please!!! Look on You Tube,you will find anything you want on Video from repair shops

...ranger 1992 4x4. i want to replace the 4 ball joint. i take off everything. i just wonder and can i take off both solid axle shaft so i can take off the ball joint The steering knuckle has to be ...

...Ranger 4x4 one front wheel campher and toe in are considerable off. What do I adjust to correct? the camber is set on these by the bushings (offset) in the spindle platform and the bushing at anchor ...