Questions & Answers for: radio button

...radio will beep. Release the AS button. enter the code using the buttons 1,2,3, & 4. For example, if the code is 4739 press, button 1: 4 times button 2: 7 times button 3: 3 times button 4: 9 times ...

...Button 1 of the Slave radio. 3. Within 2 seconds Press and release Programmable Button 1 of the Master radio. 4. The LED for both radios show flashing orange during cloning. 5. Once cloning is ...

...radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1. Once the code shown on the ...

...on the radio with the clock display facing you. If the button is showing the red painted mark, you have the HOLD button engaged. Switch it off, and then press the Power button to turn on the

...radio has a set button: Turn key on and radio off. Press the set button and use the right seek button to set the minute and left seek to set the hours. If it has no set button: find the hour and ...

...radio out! How to enter code: Press button 1 until 1st number is reached (one click at a time) Press button 2 until 2nd number is reached Press button 3 until 3rd button is reached Press button 4 ...

Radio" button again. Wrong. If you have pressed the "AL/MEM" button to access your preprogrammed channels, pressing the "Radio" button simply takes you out of the "AL/MEM" function and back to the "FM

Radio" button again. Wrong. If you have pressed the "AL/MEM" button to access your preprogrammed channels, pressing the "Radio" button simply takes you out of the "AL/MEM" function and back to the "FM

...Radio" button to turn on the radio function. The display should show the current radio frequency. Use the "Tune +" and "Tune -" buttons to tune to the desired radio station. You can also hold down ...

...button, turn on the radio by pressing the Power/Menu button. Keep holding the Menu button until the display shows the Reset prompt. 4. Use the Channel Up or Channel Down button to navigate to the ...