Questions & Answers for: Lutron quick power compact

we installed the new fourescent bulbs in our can lighting...some work great..other flicker for no apparent reason...does it have to do with the settings? You can not dim compact fluorescent lamps. The

The switch quit working and when i turn on my micro-wave it went I just had the switch replaced and it doesn't work again. What type of bulbs are you using? Most compact florescents (CFL) won't dim at

power wire, or Hot wire from switch connects to the Module-black wire. The Module-white wire connects to the Neutrals (which are white and usually twisted together and covered with a wire nut). So all

...power. Swap dimmer with regular switch and see if lights turn ON. Check dimmer wires: if wires to dimmer are pushed into 'quick connect' holes on back of dimmer, these wires can get loose. If dimmer ...

power to the lamps.  Older dimmers aren't very efficient and work a little differently - but should still do a good job as far as brightness of the lamp.  You can run into trouble trying

power down from 120 volts to the the 12 volt bulb voltage.  A transformer is an inductive load. A transformer's inductive load is completely different than the incandescent load the dimmer is

...power is being passed through the switch to the lamp and the light should be on.  If not, try replacing the lamp.Minimum recommended connected load is 40 watts.  This switch is ONLY for use ...

power. Tried 2 different switches. If I hard wire the lamps they do light-up. I wired this live, did I "blow" up these switches? That switch says on it that it is for fluorescent lights only

...power, after few h It remains off all day long and when turned on at night it shows the problem, then next day it's like nothing happened until you turned it on again. The dimmer when ...

WHEN ON DIM THE LIGHT FLICKERS That is because the dimmer is designed for incondescent lights and you are using compact fluorescent. To solve the flickering problem add at least one regular bulb to ...