...tv should last a good 10yrs or so, the money we as consumers put out to sony and other corporations, should not go out after 6mos, 10mos,, 1-2-3-4- or even 5yrs no compre sony todos dan ese problema ...
Question about KV-27XBR45 27" TV
TV seemed to convulse, staying in stand-by mode trying to ignite but, alas, no picture. I unplugged it and put it out of its misery. I waited a half hour and tried again, to the same result. Any ideas
...stand by mode plug back in and try pushing the power switch on make sure the TV if it has a remote is on the right im put to get a picture say like a satellite or cable or DVD player. hope this
Question about LE26R73BDX 26 in. HD-Ready LCD Television
...ACCEPTED do this exactly tv in stand by press the following buttons in order info menu mute stand by when tv comes back on select reset this puts tv back to factory mode tune in etc as if a new ...
...put your tv on stand by using your remote. Then you have to switch the tv off using the power button on the tv. After that, while pressing the teletext key on the remote (magenta one), switch the tv ...
Question about 26 in. LCD TV
TV will not turn off it will only put the set into stand-by mode. In many cases if the TV is in stand-by mode, and then switched off, when the set is turned back on, it will still be in stand-by mode,
Question about TXL42S10B 42 in HDTVReady TV
...tv has been put on stand-by by the remote, and is then switched off by the set, when the set is turned back on it is still in stand-by mode and you need to press the stand-by button on the remote. ...
Question about TXL42S10B 42 in HDTVReady TV
...tv and was told the previous owner had put the child lock on it powers up but won't come out of standby mode.I have managed to turn it on twice but when it's turned off back into standby mode can't ...
Question about TXL42S10B 42 in HDTVReady TV
tv apart several times to check for bulging capacitors, but they all look good. After putting the cover back on, it will usually start working normally again. Sometimes when I unplug it and let it sit
Question about TXL42S10B 42 in HDTVReady TV
TV's power light blinks when you power it off or on, or put it in Stand-by mode. ... Press the "Power" button again to set the TV to operate in Stand-by mode. The Power LED Indicator should illuminate
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions