Questions & Answers for: Ford Thunderbird purge code

...catalytic converter codes, it means the cats. are inert and need replacing. P1443 is the the Evap purge sensor, if it is clogged with carbon pieces the Carbon Canister will also need to be

...purge flow system Continuous Memory Diagnostic Trouble Code (DTC) P1443 indicates an incorrect Evaporative System Purge Control Valve flow. Possible causes: -- Obstructed, open or cracked hoses ...

...code P1407 Exhaust Gas Recirc No Flow detected. Is this a do it yourself fix and if so where is this located on the car? Any help is appreciated, thank you. I don not remember the ecxact number of ...

Purge Control Valve fault. Loose or defective gas cap will cause this code. Good luck where is the solenoid onthe 97 thunderbird Behind the passengers front headlight, down low. You'll find a 

...CODE P1443 - LOW PURGE FLOW OR NO PURGE FLOW CONDITION DETECTED.POSSIBLE CAUSES EVAP CANISTER PURGE VALVE STUCK CLOSED MECHANICALLY FUEL VAPOR HOSE BLOCKED BETWEEN EVAP PURGE VALVE AND THE FTP SENSOR ...

code more or less. A bad purge valve may give you a warning that the Evap system has a problem and this would include lines, tank, and the fuelcap. Sometimes the Code would be more specific naming the

code Inspect wiring and vacuum lines at the evaporative emission (EVAP) purge flow sensor and solenoid for pinched, cracked and/or loose connections. If everything looks OK, install a replacement EVAP

...code p1443. Some say replace purge valve and some say PCV. Where is the purge valve located. I've traced what I believe is vacuum line to a component on the right side of the intake. It seems ...

...code p1443 - Evap canister purge system mafunction.possible cause faulty Evap canister purge valve.fuel vapor hose blocked between Evap purge valve and the FTP sensor or blocked between purge valve ...