...instructions I would be so happy and amazed...can you help me? First thing is to locate tension pulley and put a box end wrench on the bolt in the center of this pulley, by moving the pulley up
...i put the alternator belt on a 1997 ford aerostar Place a socket at the serpentine belt tensioner pulley ant tour it that will allow you to install the belt on the pulleys. If you don't have the ...
aerostar 95 the belt or some pulley is making noise i changed some pulleys and still make noise Check out he clutch fan.
Question about 1995 Aerostar
...pump and the tensioner are the only items that run off the BACK side of the belt. So, it is the pulley that is NOT the waterpump- and it will have a 9/16ths nut sticking out of it (so that you
...Make sure to have a drain pan. remove the power steering belt by removing the bolts to the idler pulley. and let belt off the pulley.remove the alternator upper bracket. and remove belt. Take fan ...
...lines and elec connection off. Have 3 bolts for pump loose. How do I loose the belt and remove the pulley? Do I need special tool? You have to find the belt tensioner. Then place a 3/8 th inch pull ...
replacing serpentine belt were do you pull on the tension pulley ? You need a serpentine belt tool. rent it at the parts store. most tensioner pulleys can be released with a 15 mm wrench in center of ...
How to install the belt one of the pulleys is not matching with the belt or the pulleys on bottom Sounds like you have the wrong belt
...Drive Belt 2 N606068 Bolt 3 10300 Generator 4 10153 Generator Mounting Bracket 5 8509 Water Pump Pulley 6 6B209 Drive Belt Tensioner 7 N800199 Screw 8 8678 Belt Idler Pulley 9 N802096 Screw 10 ...
...steering motor how to remove power steering motor Remove the serp belt. Use a power steering pump pulley remover to remove the pulley. Remove the three bolts that hold the pump to the bracket.
Usually answered in minutes!
226 Questions
181 Questions
116 Questions
99 Questions
95 Questions