Questions & Answers for: Buick Park Avenue a c pulley

Crankshaft Pulley..98 Subaru Forester Hi, Just found out my crankshaft pulley is loose. Anyone know what tools and what I need to do to fix it? Please, any help is appreciated. just a socket set will ...

...and fell off. Much coolant was released from the vehicle. Don't know which happened first. The pulleys all move freely, except for the crank pulley, which I believe drives the belt. The pulley

...You'll need a 1/2 inch or 3/8th inch ratchet, or a serpentine belt tool to put in the tensioner pulley, there will be a square hole in the tensioner to put the tool in. Pull up or push down the ...

how to change serpentine belt Most are held in place by a tension pulley. It is on a spring load tension arm. It takes a breaker bar to get enough force to move the arm. Pushing/pulling in the wrong ...

...serp belt, but now no tension. Hello. The tension can be adjusted. Just loosen the tensioning pulley, use a crow bar to put tension on the serpentine belt and tighten that tensioning pulley

how do you know which pulleys are which? Hello. Trace the pulleys to the components they turn. That's it. Joe Its from experience. Each pulley is in front of a component. So it is a matter of ...

Is there an adjustable pulley on the 1996 Buick Park Avenue that lets you replace the belt? Hello... Yes there is an adjustable pulley.... It is called a belt tensioner. You can find it, with the ...

my serpintine belt keep coming off i replaced pulley and tensione my serpintine belt keep coming off i have replaced the pulley and tensioner Typically a belt will come off if all the pulleys are not ...

Bottem pulley on engine block is making noise, I think the bearings are going out. What is this pulley attached to and can it be lubricated? the bottom pulley is the crank pulley. It is attached to ...

remove crankshaft pulley I have a 98 buick park avenue 3.8 and I'm trying to remove the crankshaft pulley the bolt is out and i have no bolts in the front of the pulley for a puller how do i get this ...