Questions & Answers for: Buick a c pulley

Question about 1996 Regal Olympic Gold

1 Answer

...regal fan belt slipped off I know I have to loosen the idler, but how do I do it? Ken The idler pulley is spring loaded. With the correct size socket and ratchet and a strong arm just pivot it ...

Ad

lost one of thee wheels the fan belt runs on it could be the tensioner pulley or idler pulley. to find out which one, the idler pulley is only the pulley itself. the tensioner pulley is attach to an ...

Ad

Question about 1995 Park Avenue

1 Answer

how to change serpentine belt Most are held in place by a tension pulley. It is on a spring load tension arm. It takes a breaker bar to get enough force to move the arm. Pushing/pulling in the wrong ...

my serpintine belt keep coming off i replaced pulley and tensione my serpintine belt keep coming off i have replaced the pulley and tensioner Typically a belt will come off if all the pulleys are not ...

Question about 1997 LeSabre

1 Answer

...belt? If so you need to route the belt by beginning at the bottom around a/c pump and crankshaft pulleys then to the right of water pump pulley,right of tensioner pulley,down to power steering

Question about 1998 Park Avenue

1 Answer

Bottem pulley on engine block is making noise, I think the bearings are going out. What is this pulley attached to and can it be lubricated? the bottom pulley is the crank pulley. It is attached to ...

i have a 2003 buick redevous 3.4 the tensionor went out and had to replace the idler pulleys,since i have done that my belt keeps tracking half way off the crank pulley any sugestions This sounds like

Question about 2003 Century

1 Answer

water pump pulley how difficult to put a water pump pulley on According to the pictures on e-bay, all that you need to do is to remove 4 bolts. The pulley should come off, so you can replace the ...

How do I find a belt for 02 buick rendezvous bypassing the power steering pulley My power steering isn't functioning. I replaced the pulley and it broke again. I need to get a belt to bypass that ...

How do I move the tension pulley to loosen the water pump belt? loosen of the big nut that holds the pulley on the shaft behind the pulley there will be a long bolt that you screw up or down and it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

2002 Buick Rendezvous
2002 Buick Rendezvous

1,091 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...