...oil pan on a 2002 gmc sierra 1500 v6 4.3l have removed the bolts but it still won't come loose any thing else that needs to be removed? did you pull the rubber plugs between the motor and trans out? ...
...oil change pull the plug on the oil pan as its draining take off the filter which should be on the upper end of the motor you may need a hose to put on the bottom of the oil filter base and there ...
...oil pan ?? It appears the cover is stuck Or at oil pan area cover has 2-4 bolts at front of oil pan and harmonic balancer will need to be removed to take cover of of crankshaft.. lemmee kno if that ...
...oil pan to ghange the timing cover gasket on a 95 ford mustang v6? You can pull the motor mounts bolts and jack the motor up alittle, that will give you enough clearance to drop your oil pan. If you ...
Oil pan gasket replacement on a 2005 Escape My niece needs an oil pan gasket replacement on a 2005 Ford escape with the 3.0 v6. Can I do this without pulling the engine? just try tightening the bolts ...
...oil pan not really u will have to remove motor mounts jack up engine and move or remove components to remove the oil pan ur biggest problem is ur limited clearance between oil pan and frame cross ...
...pull or lift motor to remove a oil psn from a 2000 ford explorer 4.0L V6 ohv vin x? Hi Michael, In order to remove the oil pan you will have to remove the engine. Good Luck and I hope this helped
Question about 1998 Windstar
oil pressure after engine warms up your can either pull the engine to do it, or if you can get or have enough clearnce to drain the oil and remove the oil pan you can do it with the engine still in ,i
Question about 1998 Windstar
...oil pan on a 2001 gmc Sonoma pick up truck to replace gasket I have a leak in my oil pan gasket and trying to replace it iv taken all the bolts out and lifted the motor but it still want come ...
Question about 1998 Windstar
...pull the motor to replace my oil pan on a 2007 ford fusion SE 3.0L V6 I cracked my oil pan and I need to replace it but don't want to pull the motor to replace it. Is there a way I can do it without ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions