Questions & Answers for: pull harmonic balancer without puller

harmonic balancer - honda 2.2 liter I have a 1990 Honda Accord and the hamonic balancer has gone out. What is the best way to get the old one out and the new one in? Will I have to pull the motor out?

Ad

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

2 Answers

...Harmonic Balancer Puller with 3 long bolts and nuts passed through from the Inside with large Washers, plus more gentle heat without damaging the Tyre .... bingo ! Done ... and yes, RUST was prolific ...

Ad

...the crankshaft itself.) Check your local parts store for a harmonic balancer puller -- I got one from NAPA for about $75 that allowed me to pull the balancer without removing the

Question about 1989 4Runner

1 Answer

...harmonic balance or drive pulley on the front end of the crankshaft? Can anyone supply me with this info? Thanks Neil. Hello, Yes, it's possible to change the seal after removing the balancer. If the ...

Question about 1990 Cutlass Ciera

1 Answer

...pull off a harmonic balancer off a oldsmoble cutlass cieras without jumping out or time if your just pulling it off to change the front seal. all you need to do is remove the belts off of the accs. ...

...pull the harmonic balancer. Do i need a puller 1992 cutlas ciera c with 3300 v6. Yes. You always need a puller for the harmonic balancer. Never try to remove it without a puller. You may be able to ...

Question about 1992 Cutlass Ciera

1 Answer

harmonic balancer. (depending on the year of you engine these marks veri in appearance. Ignition timing is set while the engine is running with a strobe light that is triggered by the number one spark

Question about 2001 Neon

1 Answer

...without pulling the motor. THe bad news is you need 2 floor jacks and a set of jack stands to do that. You will need to go to Auto Zone and borrow the Chrysler Harmonic Balance pulley puller as that ...

harmonic balancer on a 3.0 toyota truck can;t get the bolt out of the balancer which direction do you turn the bolt? The bolt is usually toqued to 150 foot pounds, or in the realm of 200 newton meters

harmonic balancer with engine in the car. Mazda Millennia 2.5 balancer has failed. looks like I cannot get it out of their without lowering or pulling the engine. front wheel drive? try taking off the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...