bb wont load into the gun, then i have o pull it out and fix it. how can i fix that problem? What i did was i get a screwdriver and inserted where the bbs go then push a little down so the metal would
pull trigger and you can hear the air blow, but no BB fires. 1) **** the gun and look through the hole in the top, half way down the barrel. 2) You should see a BB loaded into this area. - if no bb is
...plunger spring may have broken, or perhaps the plunger itself has torn through (the rod may have pulled through the plunger head). It almost has to be one of the two. You'll have to either take it ...
Question about Hop Up Bucking for Airsoft Guns
The pull back **** system on my BB gun doesnt work if youre gun came with a battery than its not supposed to work but if it isnt automatic or electric than the spring might be missing
...BB gun? Unscrew the barrel insert from the barrel and pull it out. There is a sliding tab that you have to slide towards the end of the barrel insert so that it can be loaded. On the smaller side of ...
bb to be loose in the gun, if you pull the clip out before the gun is empty you will always have a loose bb fall out. don't know exactly why but it is normal can someone tell me how to put my crossman
...it, but for some reason it isn't shooting the bb's out Are you pumping the gun??? Once you have bb's in the gun you have to **** it and then pump the foregrip 10 times then pull the
Question about (4032)
My daisy 340 Powerline .177 caliber air soft bb gun wont shoot the bb anymore they just fall out after pulling the trigger Try some oil down the barrel and see if that helps.
...button you push to release the clip fell out and before that the bb just fell out the end after i pulled the slide back and full clip .now the black peace the one botton on each side is one ...
Usually answered in minutes!
284 Questions
229 Questions
170 Questions
130 Questions
106 Questions