Questions & Answers for: projector lamp cover

Ad

Question about VPL-ES3 Multimedia Projector

6 Answers

projector. The lamp cover light would flash and the projector wouldn't turn on. I think its a problem with a filter cover. This fixed the problem for me: Plug out the projector Click off the filter at

Ad

Question about VPL PX31 Multimedia Projector

1 Answer

...lamp in projector? if yes, please make sure lamp cover is fixed properly on its position. There is safety switch under lamp cover that needs to be pressed to turn off lamp cover light flash.

Ad

Question about VPL-CX61 LCD Projector

2 Answers

...UR PROJECTOR YOU CAN SEE TWO PUSH BUTTON SWICHES ARE THERE ONE IS NEAR UR LAMP COVER AND ANOTHER IS UR AIR FILTER WITH A PAIR OF WIRES SHORT THEM AND START UR PROJECTOR UR PROBLAM WILL BE SOLVED ...

Question about VPL-EX1 Multimedia Projector

1 Answer

...lamp there is a switch in the projector is OFF If lamp cover not fix proper after replacement of lamp the lamp/cover indicator flashing SOLUTION: Open the lamp cover and fix proper and tight the ...

Question about VPL-EX1 Multimedia Projector

2 Answers

...projector lamp? How do I change the projector lamp in my LCD projector? Instructions Front Projector 1 Disconnect the power cable from your projector. Allow it to cool for 30 to 60 minutes. Lay the ...

Question about PB6110 Multimedia Projector

1 Answer

...lamp if the projector will not power on or if the lamp indicator is flashing. Turn off the projector and let it sit for at least 30 minutes. Locate the lamp cover and remove or loosen the lamp cover ...

Question about 4310WX Projector

1 Answer

...lamp if the projector will not power on or if the lamp indicator is flashing. Turn off the projector and let it sit for at least 30 minutes. Locate the lamp cover and remove or loosen the lamp cover ...

Question about PLCXU355 LCD Projector

1 Answer

...lamp if the projector will not power on or if the lamp indicator is flashing. Turn off the projector and let it sit for at least 30 minutes. Locate the lamp cover and remove or loosen the lamp cover ...

Question about 1209S DLP Projector

1 Answer

...lamp if the projector will not power on or if the lamp indicator is flashing. Turn off the projector and let it sit for at least 30 minutes. Locate the lamp cover and remove or loosen the lamp cover ...

Question about VPLCS1, VPLCS2, VPLCX1 Replacement Projector Lamp - LMP-C120 Projector Lamp

1 Answer

...projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited Mobile: 0086-13178867858 Wechat ID: ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...