Questions & Answers for: projector goes standby

...projector of the remote it goes into standby mode. But this will automatically come back on after approx. 45 seconds. I cannot get it to power off completely so only way is to unplug from the mains ...

Ad

Question about PLC XU35 Multimedia Projector

2 Answers

goes to standby when switcged on fan starts green ready light is on and lamp light dims, but after about 20 seconds goes back to standby. plc xu41 may be check you vga cable (all pin also )

Ad

Question about EP719 XGA DLP PROJECTOR 2000L 2500:1 CONT DVI-D WITH HDCP Multimedia Projector

0 Answer

...projector is in standby mode, green light flashing, I push this button to power on and the green light goes to steady, but after about 20 seconds an orange light comes on next to the lamp icon and ...

...Projector turns to standby after 10 to 15 seconds When I start this videoprojector, it runs perfectly, and after the normal warm-up time, the screen of my computer is displayed by the videoprojector, ...

Question about iPAQ MP2810 Multimedia Projector

1 Answer

...countdown. On ''21'' projector goes to standby. Without lamp ballast, device works about 3 min. overheating. clean out projector with canned air. check the fans. reset the settings to factory

Question about WT610 DLP Projector

1 Answer

...no projection, and it won't come out of that mode unless I shut it down and don't turn it on again for a few hours. check your fan if not turning it will work for a shorter time and goes to

Question about LP70+ Multimedia Projector

1 Answer

...goes When I plug in the projector it immediately goes into standby mode with the orange light on top. Never turns on. Can't get it out of standby. depending on the age of the projector it is likely ...

Question about HC5500 LCD Projector

1 Answer

...projector goes to standby without me doing anything. I thought it's the blue ray defective or the HDMI cables, but they are working. SOund works but no video, and the bad thing is, the projector ...

Question about PRJSD188 PROJECTOR W DVD

1 Answer

...goes of standby, power problem overheat the temperature control is defective , Have a good day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip,color wheel, motherboard, ...

...goes off and the projector becomes standby. the lamp is good one, it is ok .the mother board is ok it seems like the fans is defective pls check every fan in the projector Have a good day! We supply ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...