projector has suddenly developed a magenta tint to all images. However, the startup image looks okay. Could it be the bulb? (its high in the auditorium and is not easy to replace or I would have tried
...projector, an image appears in the upper right side that looks like a discoloration. It does not disappear even with a new bulb. Any ideas? either dust build up beyond lamp or discolouration due to ...
...projector recently. I found the rotating colour wheel to be full of dust. Upon opening the cavity where the light is redirected and reflected onto the imager, I saw all mirrors also had a layer of ...
...so that the unit always has plenty of air movement--you'll have a cleaner image with the added benefit of LONGER life of the lamp and projector components (dust is the number 1 killer of
I FIX IT? it may need a good cleaning. blow the dust out of it with canned air. dust keeps in the heat that the projector is trying to expel. also make sure the fans all work, and replace as necessary
...dust inside the projector on the mirrors, lenses, or LCD. If cleaning the lens on the outside doesn't resolve your problem, I would contact a professional to get the insides cleaned out. Good Luck! ...
...image) Can this be corrected by cleaning/adjusting or does it involve costly parts replacement ? There is dust in RGB Panel,that ghost image is actual dust.It need to clean. Probably a bad VGA ...
...dust out of the DLP projector, but you may still need to open up the unit for additional dust removal. 4. Unsnap the main cover from your DLP projector. Because DLP projectors need periodic lamp ...
Question about X1160 DLP Data Projector, 2,000 ANSI, 2,000:1 Contrast Native SVGA - 800 x 600 res Projector
...dust inside the projector and have replaced bulb but problem persists. How do i clear the dust. Thanks Sean ,the problem is not the bulb but is the digital micromirror device (DMD chip) is aging,that ...
Question about IN104 Projector
...dust showing Hi Jay, It sounds like you are having some issues with the polarizing plates. If you are in the US, I can have one of our technicians speak with you. Feel free to check out our website ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
