Questions & Answers for: problems ceramic heaters

...ceramic heater that I purchased a couple of years ago but it's been rarely used. I turned it on this winter and found that it's very noisy. According to the User Manual, the heater is permanently ...

...heaters if used in dusty conditions. Dust builds up behind the ceramic heater and the lack of flow causes it to overheat. The unit must be dismantled and the dust brushed/vacuumed out. The good news ...

...heaters, this Honeywell ceramic heater has a tip switch designed to turn the heater off if it falls over. Unfortunately, all you need to do is bump the heater and the switch can open. Sometimes the ...

Black & Decker BDCH200C Ceramic Heater My heater was working a couple of days ago, now it will only stay on for a few minutes before the caution light comes on. It is plugged in, the filter in clean, ...

...are not reaching the ceramic. Can I service my own heaters and if so how can i fix this problem. Or do i have to call a professional you would need to replace the complete burner,call a sevice ...

Not staying on when the knob is turned to the heating positions. i have used the ceramic heater a lot at work! lately it doesn't want to stay on, it seems when I adjusted the knob to a particular ...

...s an oscillating heater. How can I fix this? Hi, Check out this tip that I wrote about space heater problems.. DeLonghi Space Heater does not Heat ...

UI have a Lasko ceramic element heater with digital display, when the heater runs for a while, it will shut off, no display at all, I then have to unplug the unit for a couple hours to get it to ...

There is a thermal fuse in this heater. A 133 deg. C fuse along with a bimetalic thermal cutout is attached to the top of the ceramic heater housing. This fuse is probably open, and is the most likely

i do not have a problem i need a manual or instructions on useing this heater for lasko ceramic element model #751320 Here is an email address for the Lasko Products Help Dept. They should be able to ...