Questions & Answers for: printer sensor fusing

...out i believe it is making a very loud noise i have a brother hl-2700cn my paper gets hung up all the time in the back through the fusing piece check the sensor on the printer back the sensor arm ...

...fusing sensor before fusing 5)out put tray sensor check all sensors if you can find out and check any paper jam there and check sensor stander at normal position, also check each sensor click ok(the ...

...machine which senses the fusing unit rotation,(the sensor sometimes comes off)(remove the fusing unit and check where the fusing unit is seated). Also try cleaning the sensor with a blower or

...hot, how can you change fuser setting on this model printer hi before change 1 - Do service 2 - check the sensor the check fusing temprature sometimes cleaning the sensor solve this problems good ...

...printer LCD.  13.01, 02  paper feed issues, worn rollers or jammed paper inside of paper feed assembly.13.05, 06 fusing assembly issues, broken sensor flag in fuser or worn busing on fusing ...

...fusing belt sensor does not detect change in the actuator for 0.5 seconds after the fusing/paper exit motor has turned on. * Defective fusing/paper exit motor * Deformed actuator for the fusing belt ...

printer is properly connected to a working power outlet, and check the power cord for any damage or loose connections. Check the thermostat and temperature sensor: These components are responsible for

...sensor detects a problem with the temperature, it will send an error code to the printer's control board and shut down the fusing unit to prevent damage. The following steps can be taken to resolve ...

printer and then clean the thermistor and the thermistor sensor. The thermistor is a small resistor that measures the temperature of the fusing unit, while the thermistor sensor is a device that reads

...sensor may need to be reset or replaced. Consult your printer's user manual or contact a professional printer technician for assistance. It is worth noting that attempting to repair the printer ...