Questions & Answers for: Xerox Phaser printer no power

...power up the printer but it is not taking any power, i tried the printer by connecting to another socket and also by replacing power cord its of no use, pls help , Have your tried to check the cable? ...

Printer hangs on Power up - displays XEROX in LCD Window Printer will not start up - any clues, this happened following a power outage. Do any of the fans operate ? Is there any aperance of the power ...

power up the printer. In these cases, the printer may report printhead jet-stack or reservoir heater disconnect, drum heater, or preheater errors (37,002.47 thru 37,012.48). Verify the AC power source

PRINTER AC power supplied by power sources such as uninterruptible power supplies (UPS?s) or DC-to-AC inverter systems may not supply enough current to properly power up the printer. In such cases the

...try power off the printer, wait 30 seconds and power it back on. According to the Xerox support website for 37,008:44 error code you should Verify the Printer's power source and isolate the

...you can try power off the printer, wait 30 seconds and power it back on. According to the Xerox website for 37,008:44 error code you should Verify the Printer's Power Source and Isolate the

...power ON the printer. If the printer returns to normal operation after the memory DIMM has been removed, replace the DIMM. NOTE: Third party memory is not supported. There are no hardware or software ...

cord at the back. The printer should power on itself, if not just power it on manually by pressing the power button. Doing the hard reset should clear off any error messages from your printer's memory

...power up the printer. Likewise, other devices sharing the same AC circuit can cause AC voltage sags that cause the printer to fail its AC heater PEST tests (Print Engine Self Test). The printer may ...

...printer to power the printer OFF and ON. Damage may occur to the printer if power is interrupted by other means. CAUTION: When cycling power on the printer, any incomplete jobs in the queue will be ...