...Hi, The Low Voltage Power Supply board is located on the right hand side of the printer. Just look at where you connect the power cord to the printer and you will see it. It is very easy to
Question about E 352dn Mono Laser Printer
...printer and power it back on, and if it is not plugged into a wall power point, change it to a power point mounted directly on the wall. Personally, I never got a Lexmark printer to work doing this, ...
...power strips, even if the printer previously worked correctly with these, as they can cause low amperage problem which can trigger a false printhead error. You can also try to plug the printer to ...
...it from the wall socket and then pressing the power button for at least 15 secs. Then plug it back in and turn on the Printer to refresh the settings. That usually solves mine. Hope that
...printer connect the power and usb reinstall the printer software then click start settings printer and select the printer as default you will see the printer icon on the task bar open it and delete ...
power). Confirm that the printer is plugged directly into a wall outlet and not through a surge device or power strip. You may also want to try plugging the printer into a different wall outlet before
...power at all on the printer. Check the AC line voltage if it is correct. Unplug the printer. Remove the LVPS/HVPS, and check the fuses for continuity. • If open, then replace the LVPS/HVPS. • If not ...
...printer and power it back on, and if it is not plugged into a wall power point, change it to a power point mounted directly on the wall. Personally, I never got a Lexmark printer to work doing this, ...
...printer power cord. 8 Verify that the printer is the correct voltage type for the environment in which it is being used. A 110V (low-voltage) printer will not work properly in a 220V (high-voltage) ...
Question about Pinnacle Pro 901 All-In-One Inkjet Printer
...save Usually, pressing the power button, brings the printer out of power-save mode. Sometimes, the printer gets hung. If this happens, disconnect the power plug, wait 30 seconds and reconnect
Usually answered in minutes!
224 Questions
171 Questions
106 Questions
83 Questions
56 Questions
