Questions & Answers for: HP LaserJet printer no power

Ad

Question about LaserJet 1020 Printer

1 Answer

...printer power cords feature a green LED built into the power plug. If the LED is not glowing, the power module may have failed. Proceed to step 7 below. If the printer still will not turn on or the ...

Ad

Question about LaserJet 2840 Printer

2 Answers

...power cord when printer initialize and turn off power switch. reconnect power cord and turn on power switch. If you get the printer to ready state, upgrade firmware. The problem solved itself when I ...

Ad

Question about LaserJet 4350 Printer

1 Answer

...power strips. Plug the printer into a wall outlet and see if this resolves the problem. If the printer is already plugged into a wall outlet, try another power source in the building that is ...

...printer not get power Check the power cable and the outlet, of these are working properly it could be the low voltage power supply and the printer will require service. Al ...

Question about LaserJet 4700 Printer

1 Answer

...printer power configuration. Connect the printer to a proper voltage source, as specified on the Power Rating Label on the back of the printer. The power cord is damaged or excessively worn. Replace ...

Question about LaserJet 2420 Printer

1 Answer

...printer (i.e the power cord and the USB cable.) 2. Press and hold the power button for 30 seconds. (this will remove the static energy if any accumulated in the printer.) 3. Connect the cables to the ...

Question about LaserJet 4250n Printer

1 Answer

...printer, disconnect the power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON the printer. Partial Reset Remove ...

Question about LaserJet 2550L Printer

2 Answers

printer . Gently pull it out turn blue toggles at sides of fuser to remove and check it. If power is connected to printer fuser will be damaged by pulling it out. Ensure there is no power to printer !

Question about Laserjet CM2320fxi All-In-One Printer

1 Answer

...power switch the printer won't power on.As you move the switch from on to off you should be able to hear a faint clicking noise from the vicinity of the power cord where it plugs into the

Question about LaserJet M1120 MFP All-In-One Printer

1 Answer

...printer. Press the Power button to turn on the printer. Update the firmware on the printer. I have included the url. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...