Questions & Answers for: HP InkJet printer no power

printer power light flashes indicating "the printer is busy" I recently did a number of envelope addressing. During which a few got caught up in the rollers and jamed. Not all pieces came out, yet the

...resolve other issues, but it's the only reset I know of. hp business inkjet 1200 printer power on the printer and after that printer not initialize, not comming in ready condition all led glow in ...

the configuratuion button and press resume (paper feed) button 3 times. Wait 20 second and press the power button. Disconnect the power and wait 20 seconds. Connect the power and switch the printer on

power on again your printer. try to print. From HP: To cold reset the printer, with only the power cable connected. By doing so, the printer settings will default to factory settings. Please note that

...printer off. 4. Remove the power cord. Wait 10 seconds, reconnect the power cord and turn on the printer. 5. If the printer does not resume normal operations, repeat the process three times. If the ...

...printer. Power Drain Remove the cartridges from the printer then unplug the power cable from the back of the printer and from the walljack wait for 30 seconds now press and hold the power button on ...

...printer, power up problems how to change a fuse in the hp 2800 printer The system will not totally power up. It shows the hp emblem on the little screen, but when you press the power button, nothing ...

...the printer is to power it off, unplug it, and let it rest for 30 seconds before reconnecting power and turning it back on. ...

power on. This printer must have a power supply board in it where power enters from the mains. A capacitor, fuse, diode, etc may have been defective on the power board and maybe that's why its not

...power on, but it shows me the same massage, what is the problem? if ur printer is connected and detected once go to device manager it show yellow on that princter number or unknow device ...