...printer power cords feature a green LED built into the power plug. If the LED is not glowing, the power module may have failed. Proceed to step 7 below. If the printer still will not turn on or the ...
Question about J3680 Officejet All In One Printer
...printer. Power Drain Remove the cartridges from the printer then unplug the power cable from the back of the printer and from the walljack wait for 30 seconds now press and hold the power button on ...
...printer. Power Drain Remove the cartridges from the printer then unplug the power cable from the back of the printer and from the walljack wait for 30 seconds now press and hold the power button on ...
...the power button to turn off the printer,disconnect the printer from the power source,reconnect the printer to the power source and finally press the power button to turn on the printer. Good ...
Question about Photosmart C6180 All-In-One InkJet Printer
...printer's power button for 30 seconds,, now plug back the power cable,, once that is done then go and allign the printer once again,, this can be done from the menu of the printer,, press the menu ...
Question about Officejet 5610 All-In-One InkJet Printer
...printer, disconnect the power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON the printer. Partial Reset Remove ...
Question about DeskJet 940c InkJet Printer
...flashing. 3. Press the power button to turn off the printer. 4. Disconnect the printer from the power supply. 5. Reconnect the printer to the power supply. 6. Press the power button to turn the ...
Question about Officejet 6310 All-In-One InkJet Printer
...printer, disconnect the power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON the printer. Partial Reset Remove ...
Question about PSC 2210 All-In-One InkJet Printer
...printer power cable tell to the salesman/saleslady about the model of the printer for them to match your printer... You can locate the input power chord into back or side of the printer...then plug ...
...printer power cord from wall and the printer, disconnect USB cable from printer.2. Press and hold the power "ON/OFF" button for 30 seconds and release it.3. Connected the power and check the
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions
