Questions & Answers for: printer no power

Ad

Question about LaserJet 1020 Printer

1 Answer

...printer power cords feature a green LED built into the power plug. If the LED is not glowing, the power module may have failed. Proceed to step 7 below. If the printer still will not turn on or the ...

Ad

Question about J3680 Officejet All In One Printer

1 Answer

...printer. Power Drain Remove the cartridges from the printer then unplug the power cable from the back of the printer and from the walljack wait for 30 seconds now press and hold the power button on ...

Ad

Question about DeskJet 5550 InkJet Printer

1 Answer

...the power button to turn off the printer,disconnect the printer from the power source,reconnect the printer to the power source and finally press the power button to turn on the printer. Good ...

Question about X2500 All-In-One Printer

1 Answer

...printer's power supply (the black box behind the printer where the power cord is attached). With the power cord still attached to power supply and the other end still plugged in to the power outlet, ...

printer. The power adapter is the rectangular black box behind the printer where the power cord is attached. Wait at least 30 seconds before plugging back the power adapter in the printer? That should

Question about X5470 All-In-One InkJet Printer

1 Answer

...power to printer. Have power up to printer. Unpluged power cord from printer, unpluged power cord from power source.Cannot power up the printer This article in the Lexmark website will help you ...

Question about X5470 All-In-One InkJet Printer

1 Answer

...printer. Unplug the power cord from the power outlet in the wall. Replug the power cord after at least 10 seconds - bypass any power surge devices or power strips. Replug the power adapter into the ...

Question about PSC 2210 All-In-One InkJet Printer

1 Answer

...printer power cable tell to the salesman/saleslady about the model of the printer for them to match your printer... You can locate the input power chord into back or side of the printer...then plug ...

Question about Passbook PLQ-20 Matrix Printer

1 Answer

power on printer? I Cleaned the passbook detection sensor and assemble the printer. Then i was power ON the printer. But that not powering ON. printer power problem no powering on (epson plq20 printer

Question about Passbook PLQ-20 Matrix Printer

1 Answer

...printer to power the printer OFF and ON. Damage may occur to the printer if power is interrupted by other means. CAUTION: When cycling power on the printer, any incomplete jobs in the queue will be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85219 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...