printer has a light flashing the symbol is a triangle with a question mark on it. I cannot find the manual and I don't know what this means or how to fix it. I would appreciate your help. Printer is a
error printing on brother hl 2040 series theres a 1 inch thick line on the right side of the paper when you print........ how can i take that out? Check blue slidy thing on drum is in home position ...
...printer is printing an extra line through the document when you print. How can I eliminate this? Thanks check blue slidy thing on drum is in home position marked with a triangle, slide it a couple of ...
...printer but nothing else. Put the disk that came with the unit into the Disk Ddrive and run the Installation Program. This will install both the Drivers and the Interface Programs for your unit. If ...
...the cartridge, would it cause the printer to stop printing? Right Click on My Computer, and select Manage. Look at Device Manager and look for any yellow exclamation marks. It may not be
exclamation mark(You Can Sometimes see that Exclamation Mark Under Other Devices) if it doesnt have an exclamation mark but it says cannot find driver u can just uninstall and reinstall the software..
Question about DCP-110C All-In-One InkJet Printer
when i plug the printer in all that lights up is the red exclamation mark. check your ink or there isn't any paper in your printer please check your Manual it might tell you the problem is
Question about DCP-110C All-In-One InkJet Printer
...printer: * Cartridges marked with a triangle go into the left carriage slot. * Cartridges marked with a square or pentagon go into the right carriage slot. If issue not resolves Repeat repeating and ...
Question about DCP-110C All-In-One InkJet Printer
...printer and from the moment I plugged in the Lcd was blank and the exclamation mark has not stopped blinking. Tried things to no avail. check the following things1.check catridges are placed properly ...
Question about MFC 420CN All-In-One InkJet Printer
...triangle with exclamation mark inside. Printer cable is fine (purchased a new one and still didn't work), ink is full. you might have multiple prints loadedmake sure you have the printer turned ...
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions