Question about Aficio CL3500N Laser Printer
...printer drums, I've still got the smudging problem. When I asked K-M support if I could manually clean the drum, they said there's not enough room to access the drum, and it's too hot to touch. Any ...
i have replaced the new drum due to white lines are printing out on my pages. it looks like toner was not adding enough to the cartridge. Any clue to fix it? thanks ( the previous drum only last about
sc491 error on ricoh MPC 3500 I am receiving an sc491 error on my /ricoh MPC 3500. Sc 491 straight from manual High voltage power: Drum/ development bias output error An error signal is detected for 0
Question about Aficio SP C411DN Laser Printer
printer is streaking on color graphics. I have cleaned out the cartridge area and have also replaced a few toner cartridges to see if this is the issue but that is not helping. Any ideas? Pull out the
Question about Aficio CL2000N Laser Printer
i have this error code on my ricoh aficio cl7200 : SC 440-02 On the CL7200, sc440-02 is a color drum motor error. This error could be caused by a bad color drum unit (any of the 3 colors) or the drum ...
Ricoh 1027 line down middle of page Locate and check the printer drum. You should be able to see the mark that is causing the line on your page. It could be s scratch or a ring of toner that the wiper
Question about Aficio 2027 All-In-One Laser Printer
I have a Ricoh 2238c. Are the drum units different fro each colour or is it the ame part. I know the devleoper units are colour specific but I was wonderin g of the same applied to drum units. All ...
Question about Aficio 2027 All-In-One Laser Printer
...drum unit and toner cartridge. Wait 30 seconds. 2.Replace the drum unit and toner cartridge into printer. 3.The error message "Change Drum Soon/Drum end soon" will continue to appear if the drum ...
printerwilln not print clearly kindly check your drum life.if your drum life expire then replace the drum unit.your problem will solved
...conductor The photo conductor is the round drum unit that is light sensitive. The laser in the printer writes an image of what you want to print on the drum and then the toner is applied to the ...
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions