Questions & Answers for: print servers subnet

...subnet mask of print server. open the internet explorer type the url as specified in manual enter the username & password as per manual. there will be the setting page displayed where you van change ...

...Print servers! when you tried to ping the restored ip for the print server did your computer was in the same subnet? if not try to configure your machine ip to be in the same subnet for your print ...

...print-server. the server has a fix ip-address and the subnet is correct. so where could the problem be? thanks for any help pasithee sorry for my english =) Please check the print queue in the ...

...sure that the router and print server are configured to the same subnet... 192.168.1.x for example... and then try it. Let us know if that doesn't resolve your issue, and we'll keep working with

...subnet 255.255.255.0 My Print server MAC address is : 00-05-5d-5a-04-54 I want to assign the printer server IP address 192.100.100.50 and I tried the following DOS command from my XP ARP -s ...

...subnet while setting up the DP-301U. If you haven't changed anything on the print server yet, then you are correct that it has an IP address of 192.168.0.10, and the subnet mask is 255.255.255.0. So ...

Print servers and the router should have their addresses assigned manually so the other units on the network can find them at the same place after a restart. Routers typically get address 0 or 1 (e. g

...print server and the link sys router . Check there are two DCHP servers and if there are deactivate on and use the other . check the ip addresses in use on the laptop and on the desktop and the ...

...print server. I get message that the subnet address needs to be validated. I have entered the following print server info. IP Address:192.168.0.1 and the following Subnet Address:192.168.0.1. I have ...

...subnet as the print server's IP Address for the two devices to communicate. (For example, if print server's IP Address is 192.168.0.10, with a subnet mask of 255.255.255.0, then your computer's IP ...