...print head and damaged the teeth on the belt. Do you have an service manual/video/instructions for replacing it or for a similar canon printer. Thanks Or can i just loosen n rotate the belt a bit, to ...
Question about MP610 Photo All-In-One Printer
...print head nozzles. On some printers the print heads are part of the ink cartridges and are therefore replaced each time new cartridges are installed, but with Canon there is only one permanent print ...
Question about MP610 Photo All-In-One Printer
...any ideas , otherwise printeris great The print head is clogged.Try unclogging with cleaning process in maintenance mode.If not help you need replace the print head.It's part number is ...
...same problem. It sounds like you need a new print head. You can find them online for around $75.00 each. I've had very good luck with Precision Roller. Do a google search for "canon mp610 print
Question about MP610 Photo All-In-One Printer
...print head I changed my black cartridge in my MP610 and received error U052 Incorrect Print Head. I didn't touch the print head. I can't remove message and therefore can't print. PLEASE HELP. Thanks. ...
...print head on pixma mp610 BK nozzle blocked. Try this : The gray-colored arm (it's not that small) is to the right of the cyan cartridge. It is the arm or extension of the gray-colored hinged cover. ...
Question about MP610 Photo All-In-One Printer
...Print head and cartridges manually move to the left 4. on the extreme right is a white plastic cover is visible, which is attached to a spring 5. Clean the cover carefully (no chemicals, not wet) and ...
Question about MP610 Photo All-In-One Printer
...print head nozzles. If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later ...
...tell me that "The type of print head is incorrect. Install the correct print head." What can I do? I turned it off and back on, but I have the same message. its time to change those ...
Question about MP610 Photo All-In-One Printer
...print head with cotton swabs dipped in hot water. Once it is finished, allow to dry the print head and replace the cartridges. If you still stuck then do visit this site: Canon Support Code 300 ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions