Questions & Answers for: no power to to tower

...plugged in- but the tower front will not turn on- the monitor is powered up, no screen coming on- the problem is your power button needs to be replaced or you can buy a new pc box on ebay for

...tower case. ATX probably refers to a ATX switch mode power supply. It is one of the most typical cases used by non-laptop computers.... Also mis-called a "desktop". ATX refers to the motherboard, ...

...Power Cord goes into the tower Which outlet on the tower The Dell 725 printer power cord does NOT plug in to the tower. The Video Cable, on the other hand, plugs in to the tower's video output. Look ...

tower wont turn on i plug it in the green light on the power suply turns on and when i hit the power button on the computer the button turns orange and thats it... can i use a diffrent power supply on

...tower and power it back on. If the amber light is on the monitor power button and the tower power button is off or blinking amber it could mean that it is a bad power supply. Thnaks for using fixya ...

...power button on the tower for 10 seconds. There would be no activity on the tower when you do this. Reconnect the power cord and then power on the computer to see if the issue is resolved. Thanks for ...

...power to tower. Pressing power on button on front of tower fails. Is there some kind of reset or fuse to look for? There is no easy fuse. Did the computer get turned off at the back? Some power ...

...power button on tower for 15 seconds.Then again try to connect monitor and check,if still nogo,and if tower has no lights then issue with motherboard or video card or power supply.If possible try ...

...power off the tower disconnect the power cable 1.open the side panal of the tower 2.then open the front panal of the tower 3.the please toggle the power button from inside the tower 4.then put back ...

...power of the system tower and remove the power cord from the back of  the tower. Press and hold the power buttoon for 10 seconds and the reconnect the power cord and turn the tower on. Check if ...