POWER STEERING IDLE PULLEY AND OTHER SIDE PLACE ON TENSIONER PULLEY TO AND PUSH THE TENSIONER AGAIN AND PLACE THE ALTENATOR PULLEY AND YOU ARE DONE. BEFORE START TO ENGINE FALLOW THE COMPLETE BELT FOR
...power steering pump pulley go to a parts store like advance they have a power steering pump pulley tool u can use it to install and remove the pulley they ussually will rent this tool and it has ...
...power steering pump. There are 3 bolts that hold your power steering pump on and they are located in 3 different positions and are accessable through the holes in the pulley (rotating it to access ...
...power steering pump on 02 grand am? Remove the serpentine belt (loosen off the tensioner below the alternator). Remove the 3 bolts accessible thru the holes in the power steering pump pulley (13mm ...
...power steering fluid reservoir suffered a blow that cracked the top recently. I was losing fluid from the top and sealed the spot with JB qwik weld, it seems to have worked. Unfortunately, I'm still ...
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,208 Questions
