1989 plymouth horizon check engine light on I did the engine code test and got back 3-4 anyone know what it means? Code 34 is set when the computer does not detect a voltage to and through the speed ...
front brake will not release all the way -drags . have already replaced caliper. The brake line may be corroded and isn't allowing the brake fluid to flow back to the caliper. I used to see it on old ...
ALT. OVER CHARGING CAUSEING IT TO BLOW HEAD LIGHTS Sounds like the regulator is blown if this is in fact true. How do you know it is over charging (besides headlights blowing). If it were truly a ...
...is coming out by the pulley. how do i fix this? You will have to remove the power steering pump,then use a power steering pulley puller,to remove the pulley,then install a new seal,and hope it ...
...power steering pulley be conneceted to the pump but is crooked and leaking The bearing had given out, and the seal. You'll have to replace the pump, not a big job, find one on ebay or a junk yard. ...
power steering pump how do i change the power steering pump the battery is behind the driver side frn front of the front wheel, remove the wheel, then remove the cover that guards...
my 1988 plymouth horizon runs fine when on throttle but when i let up it spits nd sputters and dies. I have checked the charging system and it brings up no codes. Check and clean AIS motor. (automatic
...bolt for the power steering bracket? Or what is the size of the bolt we need so we can find it close to home? any auto parts,probaly a 1/2 bolt but I would try and bring the old one if you have it. ...
...to do with it too check your spark plugs, and your power steering pump, the pump could be placing too much load on the motor, and the spark plugs/ignition system are common causes of ...
Can't remove the front pads on 88 Plymouth horizon what exactly is going wrong?
Usually answered in minutes!
14 Questions
26 Questions
16 Questions
8 Questions
2 Questions
