...power steering and alternator pulleys. Twist belt to get between tensioner and front cover and between power steering pulley and engine mount bracket. Raise and support vehicle. Turn wheel to the ...
...power steering pump If you have noise, remove the serpentine belt and spin the pulleys to see which is making noise, has play, etc. I thought my power steering pump was bad, turned out to be the AC ...
Power steering pump pulley Drive belt Underhood accessory wiring junction block Washer and coolant reservoirs Battery and tray Front diagonal brace Rocker arm covers. Torque the bolts to 80 inch lbs.
power steering when stopped but at around 15 mpg works? I would check the pulley on the power steering pump to be sure the bearing is not loose/worn. You should remove the belt so that
...power steering pump hoses with a line wrench by turning the bolt in a counterclockwise direction. The hoses can be set aside. Some fluid may drain out into the drain pan.4Firmly press against the ...
...power steering pump (this is the larger pulley on top of the engine in front of the passenger side), and the belt goes down forward to the alternator. It is difficult to see unless you remove the ...
Usually answered in minutes!
972 Questions
508 Questions
489 Questions
390 Questions
394 Questions
