...power steering fluid resevoir/pump To the right of that there is a big bell-shaped pully. That is your water pump. This was a quick rundown of how I got to mine to check it out, Your engine might ...
...power steering unit hits pulley -wont come out far enough.does pulley come off or need to remove power stering pump. there should be holes in power steering pump pulley that when positioned correctly ...
Question about 2004 Monte Carlo
...power steering pump pulley on a 2003 monte carlo I need to remove the last bolt holding the water pump on a 2003 monte carlo. This bolt is behind the power steering pump pulley. How do I remove this ...
...power steering pump REMOVAL & INSTALLATION Disconnect the hoses at the pump and tape or plug the openings shut to prevent contamination or excessive fluid loss. Position the disconnected lines in ...
...power steering pump lower rad hose heater hose then 4 bolts hold the water pump onto the front of engine not hard at all dont be afraid to do it clean the block with a new razor blade glue gaskets on ...
...and Power steering pully to access my water pump bolts? 2001 Monte Carlo SS 3.8L You loosen the power steering pump ,not remove the pulley Everything in the way ,unbolts if you have the right ...
Usually answered in minutes!
605 Questions
554 Questions
577 Questions
528 Questions
428 Questions
