Questions & Answers for: Chevrolet Blazer power steering pulley removal

Question about 2000 Blazer

1 Answer

power steering pump my power steering pump went out and i was tring to see if i could get some information on the best way to replace it i nerver done it before and it is very diffcult to steer my the

Ad

Question about 2001 Blazer

3 Answers

power steering housing and remove the two 15mm nuts underneath to allow you to pull the power steering bracket forward enough to access the lower intake manifold bolt. You will need to remove the four

Ad

Question about 1994 S-10 Blazer

1 Answer

power steering pump. Disconnect the feed and return hoses from the power steering pump, then drain the excess fluid into the catch pan. On models equipped with a remote fluid reservoir, disconnect and

Question about 2005 Blazer

2 Answers

power steering 2005 blazer how to fix power steering for 2005 blazer. daughter just called power steering went out, has not been squeeling, just stopped working. 2 bolts hold it on the the block, but ...

...power steering pump. Do I require a special tool to remove the pully from the old pump? Hello jess22smo: My name is Roger and I will help you. The answer to your question is yes. You will need a ...

...power steering pump under the alternator? If so the power steering pump has to be removed to remove bracket. To remove power steering pump you have to remove the pump pulley with a special tool and ...

Question about 1984 Blazer

1 Answer

...steering pump Remove belt, unbolt the pump, disconnect hoses and remove. Pretty simple. You may need a power steering pulley puller/installer depending on the year if you are replacing the pump.

power steering pump from a 2001 Chev Blazer with the 4.3 engine? 4.3L EnginePosition a fluid catch pan under the power steering pump. Disconnect the feed and return hoses from the power steering pump,

got the power steering pump pulley on the shaft too far, any suggestions? go to auto zone and barrow a power steering pulley removal tool, and just pull the pulley back off a little.

power steering pump? vortex engine, does the fan need to be removed to get to the steering pump? and how do you do this? Hi Brian:Check this REMOVAL and INSTALLATION procedure... (see Figures 2, 3 and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...