...failure Power supply failure Interlock (door) switch failure It could be that the thermistors(monitoring temperature) are just dirty and need cleaning or the thermostat has blown. THe heater lamp ...
Question about Aquos LC-37GD6U 37 in. LCD HDTV
...Power failure (There is a loose connection or you need to check the Power/Inverter unit or the Main unit) II) If the power light is blinking at a rate of one blink per min and the OPC light is off ...
...AR-156, with code H-4 H4: Heat roller abnormally low temperature. cause:- Thermistor failure Heater lamp failure MCU PWB failure Thermostat failure Power supply failure Execute Simulation 14 to ...
failure in the power control or switch failure on the unit. if your unit has power, and things lite. it is more likely you have a control/switch problem, since you can replace your unit for under $100
power failure TV won't power on. if their is no power indicator at all that was mean the power supply failure. look for blown fuse, if the fuse is blown with darkened color you need to check ...
...failure. Power failure details (Flashes slowly twice and flashes fast 3 times. > DET_D3V3(36pin) failure (L). Digital 3.3V is not applied. If error is detected during start-up or operation, the ...
Question about R310J 1200 Watts Microwave Oven
...failure of high voltage rectifier, shorted high voltage capacitor, magnetron failure, power transformer open/shorted winding(s), thermal protector open, or no 120 v supplied to power
Question about VT-G21 21 in. TV/VCR Combo
...power-failure. The TV part working perfectly before the power-failure. The VHS/VCR was also operational, except the the running was very rough and the tape would get stuff. So, I was simply NOT using ...
failure Power supply failure atureCheck the heater lamp blinking with SIM 5-2. When the lamp blinks normally: Check the thermistor and the harness. Check the MCU PWB thermistor input circuit. When the
Question about AR-5316 Advanced Digital Imager Copier
A Sharp AQUOS Model no. LC-C323-4U. The TV shut down. When restarted it quit again and again and then would not start. At failure the picture and sound were perfect?? Could be power supply failure
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions