...error is resolved. 2 Power off the AIO and remove the power supply from the back of the unit. Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the ...
Question about PIXMA iP4000 InkJet Photo Printer
Error) 3. Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error) 4. Alarm / Power light flashes orange 3 times consecutively (Paper Jam Error / Cover Error) 5. Alarm
error 6c00Alarm / Power light flashes orange 11 times consecutively (Automatic Print Head Alignment Error) 2. Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error) 3
Question about X7170 All-In-One Scan/Copy/Fax and Photo Printer
...error is resolved.2 Power off the AIO and remove the power supply from the back of theunit. Open the scanner cover. Check the scanner glass for cracks andthe scanner casing for cracks. Close the ...
...error is resolved. 2 Power off the AIO and remove the power supply from the back of the unit. Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the ...
...error Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If a surge protector is being used, remove it. Plug the ...
...error Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If a surge protector is being used, remove it. Plug the ...
Question about P6250 All-In-One InkJet Photo Printer
...power. Error message appeared. Prints OK. hi here is what i have found -- follow to all instructions accordingly although its for another model, these isntructions apply according t their techsupport ...
error is resolved. 2 Power off the AIO and remove the power supply from the back of the unit. Open the scanner cover and check the scanner glass for cracks and the scanner casing for cracks. Close the
...Error - Power On Power Off showing Scanner bulb is warming up and after 15 minutes show the Scanner Error - Power On > Power Off. Error Hello, The "scanner warming up" error is usually caused ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions