Questions & Answers for: power cord work turntable

Question about 0187SST Turntable

1 Answer

...turn off the PC then unplug the power cord from power socket, short its legs then leave it unconnected for 5min, then reconnect it to power socket and turn on PC and install driver it should work

Ad

Question about SL-1200 Turntable

2 Answers

...power to the turntable you may want to check inside the unit. Make sure the cord is not plugged into an outlet when you do this. I am assuming that you have the Technics SL-1200 turntable. Take the ...

Ad

Question about PX-E860 Turntable

1 Answer

...Power cord is in socket which tests hot and The Video/Aux/Phono button lights up but nothing happens when I push the start button on the turn table. Thank you for any suggestions. Sam With the power ...

Question about PX-E860 Turntable

1 Answer

...Power cord to a diferent working wall outlet. 2. If the Power cord is removable, try changing it. 3. Try changing the belt. 4. check whether any indicator turns ON. 5. Then, disconect the power cord ...

Question about SL-DZ1200 Turntable

1 Answer

...cord same no power changed out fuse with same amps and volt from radio shack still no power so im stuck help please. You need to use a ohm meter (you can get one cheap) and find out if the power ...

...cord (male end) to plug into the receiver for power. Since I do not have a receiver, is there something I an purchase to gain power to make this turntable work? I have a Peavey mix/amp I can run this ...

Question about SL-DZ1200 Turntable

1 Answer

...power cord for technics sl-b20 I don't have power cord for turntable where can I find one Post a picture of the socket of the turntable. I think a cord from a Sony Playstation 1 may work if it ...

Question about SL-1200MK2 Turntable

1 Answer

...power cord - Technics 1200 MK2 I need to replace the power cord on my Technics 1200 MK2...I already know how to disassemble the turntable, and I know the new cord needs to be soldered on...but not ...

Question about SL-1200MK2 Turntable

2 Answers

...Power Cord - Technics 1200 MK2 I need to replace the power cord on my Technics 1200 MK2...I already know how to disassemble it and I know the new cord needs to be soldered on...but not sure which ...

Question about SL-1200MK2 Turntable

1 Answer

...power supply cord and it didn't fix the problem. it's dead (no motor, lights, anything) The power supply of the turntable needs checking. It could be just a fuse or something more serious, such as a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...