Questions & Answers for: polyfuse

...back on...where is this fuse at? most of the modern tv sets come with a special type of fuse called polyfuse. if you cant find the normal fuse near the power section then it is clear that your tv is ...

...at these: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=F2006-ND This is a polyfuse that trips at 1 amp and resets itself. It holds off 60 voltss which should be adequate. ...

...to be put back on before grille is dished and put back. Note that SOME speakers have a fuse or a polyfuse to protect them from excessive current. If yours do not, consider puttin in polyfuses to ...

...Or you can find it at auto parts store. LIKELY the polyfuse device is ALSO gone... Probably similar to this one (1.1 amp, trip 2.2 amp): ...

...Please help. For the MOST PART the lamp is NOT the primary path for the speaker current, the POLYFUSE is and is a low resistance until it is overdriven. The bulb is a 12 volt bulb and is ...

...speaker protection network in most of Peavey speakers protecting the tweeter horn. It consists of a Polyfuse (round disk about the size of a nickle or quarter, a resistor and an incandescent bulb. ...

...circuit so if you did not try another speaker to the same wores going to the driver, it may be the Polyfuse on the protection circuit or other

... VERY SLIGHT chance wires have become disconnected. Open unit an inspect. Use ohmmeter to check the polyfuse and the lamp for open circuit indicating they are blown. Your amplifier should be rated at ...

...model) Can not get any sound thru horn. They have a "soundgard" protection network that uses a polyfuse and an automotive lamp. Open the unit and check the circuitry. Both the polyfuse and he ...

...barracuda 2tb external Spare PCBs aren't usually avaiable as such. Unless something simple like a polyfuse blew on the board, then the original is probably toast. Your next option would be to